Virtually anything with a suitable surface can be laminated. It must have a sufficient adhesive base and a suitable structure. In addition, the material must not contain any chemical substances that react with the film or adhesive. In addition, a sufficient adhesive surface must be available.
The paint of the vehicle must be free of damage. As a rule, this means no rust spots, no clear coat that is already coming off, and perfect adhesion between the paint and the component. To check the suitability of the surface, a so-called cross-cut test is carried out. As a rule, unpainted vehicle parts cannot be coated.
The answer depends on the climatic conditions, the behavior of the vehicle owners and the film used. The warranty distinguishes between horizontal and vertical surfaces, printed and solid colored films and climatic zones. Durability ranges from short-term applications of 6 months to 4 years. Of course, the film can last longer if the vehicle is mainly in a garage.
Foiling is manual work. Accordingly, the price depends on the amount of time and material used. A vehicle does not have to be large to be elaborate. Many beads, add-on parts, angled surfaces and the type of film determine the time required. Prices also depend on the type of film used. Simple through-dyed, surface embossed, metallized, digitally printed films or a combination of digital printing and effect laminate determine the final price. A car ranges from 2000 to 3000 euros. Beyond that, of course, there is a wide range.
The answer depends on the film. Of course, there is a guarantee on the processing. For this, as already mentioned, a preliminary inspection of the vehicle is necessary. For the films, there are often warranty restrictions, depending on the surface location.
Foil lettering is the laying of contour-cut foils on partial surfaces. In the case of full foiling, entire components are foiled over the entire surface.
A prerequisite for foiling is a suitable adhesive base. In addition, a sufficient adhesive surface of at least 10mm is required. The radii or beads must also be suitable for foiling. A facade foil is not suitable for a 3 dimensional due to its material properties. The film must be laid tension-free.
Ja. Die Folien müssen besonders UV-beständig sein. Die von uns verwendete Folie hat 10 Jahre Gewährleistung.
Es gibt ein Standartsortiment an Farbei die auch als Kleinmengen angeboten werden. Für Projekte können auch Wunschfarben angeboten werden. Für diese gibt es zumeist eine Lieferzeit von ca. 12 Wochen.
This depends on many factors. Soiling, type of facade, windows or other building openings, accessibility, height of the building determine the expense. After sending construction drawings or pictures, we can gladly give more information here.
This cannot be answered in a generalized way. The price is often between 70 and 100 € per square meter.
This depends on the conditions and the type of facades. We calculate with 1 to square meters per employee and hour.
We have already done a lot of foiling. Kitchen furniture, partitions and room walls, pianos, store fittings and more have been under our hands. It is important that the substrate allows adhesion.
Yes and no. There are special effect films that imitate wood or metal, for example. For coloring, mostly "normal" solid-colored films are used, which are also used for vehicle foiling.
An exact cost calculation can only be made after a detailed preliminary discussion. This requires knowledge of the type of components, the scope and the desired film.
This depends on the use of the film. Normally, the film is not subject to wear due to UV radiation. A durability is however dependent on whether the surface is stressed or there are strong temperature fluctuations. We give in any case the legal claims as a warranty.
We laser on glass, wood, felt, leather, acrylic, stamp pads and much more.
In our company, different materials are used for plates. Rigid foam, forex, aluminum composite, hollow comb web, cardboard or acrylic. Talk to us about the desired application. We have the possibility to laser, mill or cut the plates.
Yes, we deliver and assemble all over Europe.
In our company, we use latex and UV inks for digital printing. In addition, we can print on our latex machine with a white ink on transparent films and create different effects.
All materials without surface coating can be printed.
The embroidery material must have sufficient material thickness and structure. In addition, it must be possible to clamp the embroidery surface onto the embroidery frame in an accessible manner.
Yes. We include these with all printed items. In addition, they can be accessed here on the website.
The delivery time depends on the workload and availability of the goods at upstream suppliers. For textile prints we have a delivery time of about 5 days. Digital prints often go to our customers within 24 hours. Projects are to be discussed individually.
We offer various eco, fair trade, organic certifications.
Call us or send us an email. We will be happy to arrange an appointment.
Phone.: +49 36 43 - 90 66 90
Fax: +49 36 43 - 90 66 929
Mobil: +49 160 979 341 79
To the form
Drauf und Dran has been a service provider for vehicle wrapping for vehicle fleets and retail chains for many years. We install nationwide and, on request, Europe-wide. Both the production of the films used and the installation are carried out by Drauf & Dran. Drauf und Dran has been a service provider for vehicle foiling for vehicle fleets and retail chains for many years. We install nationwide and, on request, Europe-wide. Both the production of the films used and the installation are carried out by Drauf & Dran. Of course, we take care of the filming and documentation for your company at your locations. As a service provider, we adapt to your needs. The installation takes place at times that you determine. We are equipped for off-site installation. From ladders to a workshop trailer with its own power supply to a mobile kitchen. Everything is there to wrap vehicles on our premises, at your site or in the most remote corner.